SpecifyInstalledFolder1=Please specify the installed folder of
PhotoExplorer42FullUninstallingFailed=You didn't have uninstalled the Ulead Photo Explorer 4.2 Trial Version now.\nSetup was canceled.
SmartSaverProFullUninstalling=Setup is uninstalling the Ulead SmartSaver Pro 2.0 Full Version now... Please wait.
ReinstallingStartMenu=Reinstalling Start menu folders and icons... Please wait.
IconOrderNow=Order Now!
MsgUpgrade=This setup program installs Ulead SmartSaver Pro 2.0 Full Version if you have already installed one of the Ulead products listed below:
RestartSystemOrNot=Some files of Ulead SmartSaver Pro 2.0 are locked by Windows System or in use by some Applications.\nRestart System and launch Setup Automatically, choose Yes.\nClose the Applications using these files and launch Setup again, choose No.
Uninstaller=Isuninst
SpecifyInstalledFolder2=Full Version
PhotoExplorer42TrialUninstalling=Setup is uninstalling the Ulead Photo Explorer 4.2 Trial Version now... Please wait.
COO3D2FullInstalledInSystem=Ulead COOL 3D 2.0 Full Version is already installed on your system\nYou cannot install the component of Ulead COOL 3D 2.0 Trial Version now.\nSetup has canceled your selection for it.
NoDiskInDrive=There is no disk in the specified drive.\nPlease insert a disk into the specified drive.
TrialVersion=Trial Version
UPGRADE_SELECT_DLGPROMPT=This Setup installs Ulead SmartSaver Pro 2.0 Full Version if you have installed any Ulead product listed below.
COMPDLGTITLE=Select Components
TrialDialogShowSdAskDestPathMsg1=Setup will install Ulead SmartSaver Pro 2.0 Trial Version in the following folder.
ChooseFolderTitle=Choose Folder
UssmainIsInUse=Setup has detected that 'Ussmain.exe' is in use.\nPlease close the application using this file and launch Setup again.
Pe42IsInUse=Setup has detected that 'Pe42.exe' is in use.\nPlease close the application using this file and launch Setup again.
TrialVersionAlreadyInstalled=Setup has detected that you have already installed Ulead SmartSaver Pro 2.0 Trial Version.\nPlease launch the Setup of Ulead SmartSaver Pro 2.0 Trial Version to Remove All compoments then launch this Setup program again.
WebRazor101TrialUninstalling=Setup is uninstalling the Ulead WebRazor for Photoshop 1.01 Trial Version now... Please wait.
WebRazor101FullUninstalling=Setup is uninstalling the Ulead WebRazor for Photoshop 1.01 Full Version now... Please wait.
IconSetup=Setup
UssshextIsInUse=Setup has detected that at least one of 'Ulead SmartSaver Pro' components is locked by your system.\nPlease restart your system and launch Setup again.
Typical=Typical
RegistryKeysAreIncorrect=The registry keys are incorrect, the Setup program can not be continued.
ErrorInDefiningDialog=Error in defining dialog.
IfInstallPhotoshopInFuture=If you install Adobe Photoshop compatible program in the future, please remember to copy the original file of SmartSaver Pro under Aps folder of Installed folder to the Plugin folder of Adobe Photoshop compatible program in order to export images from Adobe Photoshop compatible program to SmartSaver Pro.
NoEnoughSpaceInDisk=There is not enough space available on the specified disk.\nPlease free up some space or change the target location to a different disk.
ReinstallingProgramFiles=Reinstalling program files... Please wait.
OlregIsInUse=Setup has detected that 'Olreg.exe' is in use.\nPlease close the application using this file and launch Setup again.
TitleMainTrial=Ulead SmartSaver Pro 2.0 Trial Version
PreviewsoftNumber=D363
IconUninstall=Uninstall
ReinstallingSuccessfully=Reintalling components of Ulead SmartSaver Pro 2.0 was completed successfully.
AddRemovingStartMenu=Add/Removing Start menu folders and icons of some components... Please wait.
DialogFailed=Dialog failed.
IconTutorialHome=Tutorial
HaveTwoOrMorePhotoshopCompatiblePrograms=This Setup program can only install for one Photoshop compatible program.\nIf you have two or more Photoshop compatible programs installed on your system, please remember to copy the original SmartSaver Pro files under the Aps folder of Installed Folder to the Plugin folder of the other Photoshop compatible programs.
TryAndBuyDialogShowSdAskDestPathMsg1=Setup will install Ulead SmartSaver Pro 2.0 Try and Buy Version in the following folder.
WebUtilitiesHome=www.webutilities.com
InstallSsp10aBeforeInstallation=Setup has detected that you have already installed Ulead SmartSaver Pro 1.0.\nBefore you upgrade this product, you must install the Ulead SmartSaver Pro 2.0 Patch.
SmartSaverProTrialUninstalling=Setup is uninstalling the Ulead SmartSaver Pro 2.0 Trial Version now... Please wait.
GIFAnimator3FullInstalledInSystem=Ulead GIF Animator 3.0a Full Version is already installed on your system\nYou cannot install the component of Ulead GIF Animator 3.0a Trial Version now.\nSetup has canceled your selection for it.
StartCopyShortcutFolder=Shortcut Folder:
SpecifyPhotoshopPluginFolder=If you are using an Adobe Photoshop compatible program, you can install some plug-in modules.\nPlease specify the plug-in folder of Adobe Photoshop compatible program:
SameComponentSelection=The new component selection is the same with the previous one.\nPlease select again.
SelectSetupTypeTitle=Select Setup Type
NONESELECTED=No component was selected. Please at least select one component.
SureToRemoveAll=Are you sure you want to completely remove 'Ulead SmartSaver Pro 2.0' and all of its components?
ReinstallingWindowsRegistryKeys=Reinstalling Windows registry keys... Please wait.
FullDialogShowSdAskDestPathMsg1=Setup will install Ulead SmartSaver Pro 2.0 Full Version in the following folder.
StartCopyPhotoshopPluginFolder=Plug-in Folder of Photoshop Compatible Program:
StartCopyUserInformation=User Information:
ErrorMoveData=An error occurred during the move data process : %d
LaunchSetupAgain1=Setup must launch your downloaded Setup program again.\nPlease specify the full path file name of your downloaded Setup program.\nDo you want to specify your downloaded Setup program now?\n
PleaseUninstallWebRazorProTrialComponent=Before you can install this program, you have to remove SmartSaver Pro 2.0 component of Ulead WebRazor Pro 2.0 Trial Version.\nPlease launch the Setup program of Ulead WebRazor Pro 2.0 Trial Version to remove SmartSaver Pro 2.0 component and luanch this Setup again.
COOL3D2TrialUninstalling=Setup is uninstalling the Ulead COOL 3D 2.0 Trial Version now... Please wait.
RemovingSuccessfully=Removing all components of Ulead SmartSaver Pro 2.0 was completed successfully.
RemovingStartMenu=Removing Start menu folders and icons of all components... Please wait.
FolderNotWriteable=The folder you select is not writeable.\nPlease change the target location to a different disk or folder.
InstallingProgramFiles=Installing program files... Please wait.
RemovingProgramFiles=Removing all program files... Please wait.
GamainIsInUse=Setup has detected that 'Ga_main.exe' is in use.\nPlease close the application using this file and launch Setup again.
LaunchSetupAgain2=To specify your downloaded Setup program, Click Yes.\nTo back to Setup options, Click No.
Uninstall10BeforeInstall10a=Setup has detected that you have already installed Ulead SmartSaver Pro 1.0.\nBefore you setup this product, you must uninstall the installed Ulead SmartSaver Pro 1.0.
SetupWillLaunchAgain=Setup will launch again. Please press OK and wait a moment for Setup launching again.
SetupWasCanceled=Setup was canceled.
PhotoExplorer42TrialUninstallingFailed=You didn't have uninstalled the Ulead Photo Explorer 4.2 Trial Version now.\nSetup was canceled.
PleaseSpecifyFolderAgain=The folder you specified doesn't exist.\nPlease try to specify again.
UPGRADE_SELECT_TITLE=Select One Ulead Product to Upgrade from
AddRemovingProgramFiles=Add/Removing program files... Please wait.
InstallingWindowsRegistryKeys=Installing Windows registry keys... Please wait.
WebUtilitiesCom=WebUtilities.com
No_ServicePack3=This version of Ulead COOL 3D only supports WinNT 4.0 with Service Pack 3 or above.\nPlease upgrade your system to Service Pack 3 or above before installing.
SubPath=English
PhotoExplorer42FullUninstalling=Setup is uninstalling the Ulead Photo Explorer 4.2 Full Version now... Please wait.
AddRemovingSuccessfully=Add/Removing components of Ulead SmartSaver Pro 2.0 was completed successfully.
StartCopyPhotoImpactPluginFolder=Plug-in Folder of PhotoImpact:
ChooseFolderMsg=Please choose the folder for installation.
SpecifyPhotoImpactPluginFolder=If you are using an Ulead PhotoImpact compatible program, you can install some plug-in modules.\nPlease specify the plug-in folder of Ulead PhotoImpact compatible program:
CheckDiskSpaceMsg=There is not enough space available on the disk.\nPlease free up some space or change the target location to a different disk.
DialogShowSdFinishRebootOption1=I would like to view the ReadMe file.
TitleMainUpgrade=Ulead SmartSaver Pro 2.0 Upgraade Version
FolderDoesNotExist=The folder you specified doesn't exist. Please try to specify again.
TryAndBuyVersionAlreadyInstalled=Setup has detected that you have already installed Ulead SmartSaver Pro 2.0 Try and Buy Version.\nPlease launch the Setup of Ulead SmartSaver Pro 2.0 Try and Buy Version to Remove All compoments then launch this Setup program again.
NO_ADMINISTRATOR_PRIVILEGES=
DialogShowSdAskDestPathMsg2=Warning to Ulead Product Users:
ScriptMediaCompScript1=This component includes the
ErrorMessageTitle=Error Message:
GIFAnimator3FullUninstalling=Setup is uninstalling the Ulead GIF Animator 3.0a Full Version now... Please wait.
InstallingStartMenu=Installing Start menu folders and icons... Please wait.
CheckSetupInformationMsg=Setup has enough information to begin the file-transfer operation. If you want to review or change any of the settings, click Back. If you are satisfied with the settings, click Next to begin copying files.
Canceled=Canceled
DialogShowSdFinishRebootOption2=I would like to register this product.
IconReadMeFirst=ReadMe First
DidNotRecordTheSelection=Setup didn't record the selection you did last time. Please select again.
DialogShowSdAskDestPathMsg3=Please make sure you install this program in a different folder than the one where your existing Ulead product programs are. Installing this program in the same folder will overwrite essential files for the proper operation of the Ulead product.
UleadProductInstalledInTheFolder=Setup has detected that one Ulead product installed in the folder you specified.\nPlease select another folder to install.
ScriptMediaCompScript2= program.
Congratulations1=Congratulations!
SorryCannotFound=Sorry! We can not find the installed product from the folder you specified.
SmartSaverProFullInstalledInSystem=Ulead SmartSaver Pro 2.0 Full Version is already installed on your system\nYou cannot install the component of Ulead SmartSaver Pro 2.0 Trial Version now.\nSetup has canceled your selection for it.
CustomSetupType=Custom\nYou may choose the components you want to install. Recommended for advanced users.
TypicalSetupType=Typical\nProgram will be installed with all the components. Recommended for most users.
IconRegistrationWzard=Registration
ErrorUninstSetup=UnInstaller setup failed to initialize. You may not be able to uninstall this product.
FullVersionAlreadyInstalled=Setup has detected that you have already installed Ulead SmartSaver Pro 2.0 Full Version.\nPlease launch the Setup of Ulead SmartSaver Pro 2.0 Full Version to Remove All compoments then launch this Setup program again.
Congratulations2= was found in your system.\nYou can install Ulead SmartSaver Pro 2.0 Full Version now.
UninstallFullThenInstallTrial=Setup has detected that you have already installed Ulead SmartSaver Pro 2.0 Full Version.\nYou cannot install the Trial Version before you uninstall the Full Version product.\nSetup was canceled.
ErrorMessageMsg=This program can not be continued.\nPlease write down the message, and contact with webutilities@ulead.com.tw.
PhotoExplorer42FullInstalledInSystem=Ulead Photo Explorer 4.2 Full Version is already installed on your system\nYou cannot install the component of Ulead Photo Explorer 4.2 Trial Version now.\nSetup has canceled your selection for it.
SelectSetupTypeMsg=Click the button of Setup type you prefer.
NONESELECTIONSELECTED=No product was selected. Please select again.
COMPDLGPROMPT=In the Components list, select the items you want to be installed; clear the items you want to be removed.
RemovingWindowsRegistryKeys=Removing Windows registry keys of all components... Please wait.
No_ADMINISTRATOR_PRIVILEGES=The login account does not have the required privileges to add/remove the selected application.\nPlease use an administrator account.
WebRazor101FullInstalledInSystem=The Photo Explorer 4.2 component of Ulead WebRazor for Photoshop 1.01 Full Version is already installed on your system\nYou cannot install the component of Ulead Photo Explorer 4.2 Trial Version now.\nSetup has canceled your selection for it.
PhotoExplorer42FullAsktoUninstalling=Before you setup this product, you must uninstall the installed Ulead Photo Explorer 4.2 Full Version.\nDo you want to uninstall the Ulead Photo Explorer 4.2 Full Version and continue now?\nPress Yes, uninstall Ulead Photo Explorer 4.2 Full Version and continue.\nPress No, exit Setup.
PhotoExplorer42TrialAsktoUninstalling=Before you setup this product, you must uninstall the installed Ulead Photo Explorer 4.2 Trial Version.\nDo you want to uninstall the Ulead Photo Explorer 4.2 Trial Version and continue now?\nPress Yes, uninstall Ulead Photo Explorer 4.2 Trial Version and continue.\nPress No, exit Setup.
COOL3D2FullUninstalling=Setup is uninstalling the Ulead COOL 3D 2.0 Full Version now... Please wait.
ErrorVgaResolution=This program requires VGA or better resolution.
TitleCaptionBarTrial=Ulead SmartSaver Pro 2.0 Trial Version Setup
Uninstall10Beforeinstall10a=Setup has detected that you have already installed Ulead SmartSaver Pro 1.0.\nBefore you setup this product, you must uninstall the installed Ulead SmartSaver Pro 1.0.
UninstallFullThenInstallTryBeforeYouBuy=Setup has detected that you have already installed Ulead GIF Animator 3.0a Full Version.\nYou cannot install the Try-Before-You-Buy Version before you uninstall the Full Version product.\nSetup was canceled.
InstalledProgramIsCDVersion=The installed program on your system is CD Version of Ulead SmartSaver Pro 2.0.\nYou must insert the program CD to process the Setup program of CD Version.
IconOverview=Overview
CheckSetupInformationTitle=Check Setup Information
TitleMainFull=Ulead SmartSaver Pro 2.0 Full Version
TitleCaptionBarFull=Ulead SmartSaver Pro 2.0 Full Version Setup
Viewer3IsInUse=Setup has detected that 'Viewer3.exe' is in use.\nPlease close the application using this file and launch Setup again.
Custom=Custom
PhotoViewer=1
PleaseWaitAMoment=Please wait a moment.
StartCopyDestinationFolder=Destination Folder:
IfInstallPhotoImpactInFuture=If you install Ulead PhotoImpact in the future, please remember to copy the original SmartSaver Pro files under Upi folder of Installed folder to the Plugin folder of Ulead PhotoImpact in order to export images from Ulead PhotoImpact to Ulead SmartSaver.
FullVersion=Full Version
TitleCaptionBarUpgrade=Ulead SmartSaver Pro 2.0 Upgrade Version Setup
AddRemovingWindowsRegistryKeys=Add/Removing Windows registry keys of some components... Please wait.
PleaseUninstallWebRazorProFullComponent=Before you can install this program, you have to remove SmartSaver Pro 2.0 component of Ulead WebRazor Pro 2.0 Full Version.\nPlease launch the Setup program of Ulead WebRazor Pro 2.0 Full Version to remove SmartSaver Pro 2.0 component and luanch this Setup again.
U3dedit2IsInUse=Setup has detected that 'U3dedit2.exe' is in use.\nPlease close the application using this file and launch Setup again.
PleaseInsertCD=Setup cannot add components without your program CD.\nPlease insert your Ulead SmartSaver Pro 2.0 CD.
DialogBoxBeforeFXInstallation=The installation of Ulead SmartSaver Pro 2.0 is successful.\nWould you like to install the Special Bonus Pack of 30 additional video F/X plug-ins for GIF Animator now?
GIFAnimator3TrialUninstalling=Setup is uninstalling the Ulead GIF Animator 3.0a Trial Version now... Please wait.
StartCopySetupType=Setup Type:
Help=Help
DoesNotHaveRequiredPrivileges=The login account does not have the required privileges to add/remove the selected application. Please use an administrator account.
U3dEdit2IsInUse=Setup has detected that 'U3dedit2.exe' is in use.\nPlease close the application using this file and launch Setup again.
RestartSystemOrNotTitle=Restart System or Close Applications?
